You can take an on-demand measurement using the Hilo Cuff whenever you want a point-in-time reference reading.
Before you begin:
On-demand cuff measurements are available after completing the initial setup, which includes several successful calibration measurements over the first few days.
To take a measurement:
Make sure your cuff is fully charged
Turn the cuff ON
Open the Hilo App and go to the Measure tab
Select Take Hilo Cuff measurement
Follow the instructions in the app
During the measurement:
Remain still and relaxed
Avoid speaking until the measurement is complete
The cuff will inflate automatically and guide you through the process.
After the measurement:
Your result will be displayed in the app
You can find your cuff measurements in the Insights tab under Cuff readings
Select See all readings to view your full history
Cuff measurements are also included in your reports and are clearly marked as reference measurements.
The app will guide you through performing an accurate cuff measurement.
>> Please remain still and refrain from speaking during the process.<<
The cuff will inflate automatically to take your blood pressure measurement.
After your measurement
Once your measurement is complete, your result will be shown in the app.
You can view your cuff-based readings by:
Going to the Insights tab
Click on your Average Blood Pressure
To access your full history, tap See all cuff readings.
These cuff readings serve as reference measurements within the Hilo Core system and are presented alongside your longer-term trends to support overall understanding.
Disclaimer: The FAQ is intended as supplementary guidance only and does not replace the Instructions for Use (IFU), User Manual, or Quick Start Guide. In case of any inconsistency or conflict with these documents, please contact support.